Tempo Logo  
HomeSpecsTransportationMSDSTDScontactus
car2  

Transportation Coating System

Duramar Polyurethane System
For a superior durable 2-part coating, with excellent gloss and colour
retention and high chemical and abrasion resistant properties.

Pre-primer (if required)

36-6001

Allplate 601 Vinyl Wash Primer
(an initial coat may be used for better adhesion on aluminum, galvanized or other problem surfaces)

(2 parts, mixing ratio 4:1)

Primer

6500-P-75AX Red Oxide Epoxy Primer (2 parts, mixing ratio 2:1)
4500-P-38 Grey Epoxy Primer (2 parts, mixing ratio 1:1)
4500-P-38BL Black Epoxy Primer (2 parts, mixing ratio 1:1)
4500-P-39 Grey Epoxy Primer (higher build) (2 parts, mixing ratio 2:1)
4500-P-39X Grey Epoxy Primer (higher build, faster dry) (2 parts, mixing ratio 2:1)

Topcoat

6500-Line Duramar High Gloss Polyurethane Enamel (2 parts, mixing ratio 2:1)

Reducing Thinner

4500-S-23 Epoxy Primer Thinner
6500-S-1 Duramar Reducing Thinner
Other Additives (if required)
6500-A-1 Duramar Accelerator
6500-A-2 Duramar Anti-cratering

 

Alkyd Enamel System
For a low cost, but less durable finish with the convenience of a single part system

Pre-primer (if required)

36-6001

Allplate 601 Vinyl Wash Primer
(an initial coat may be used for better adhesion on aluminum, galvanized or other problem surfaces)

(2 parts, mixing ratio 4:1)

Primer

5000-P-32B Standard Grey Primer*
P-36 Standard Red Oxide Primer*
03-4038 Grey Lead Free Phenolic Modified Anti-corrosive Primer
03-5039 Zinc Chromate Fast Air Dry Phenolic Modified Red Oxide Primer

Topcoat

5000-Line Fast Air Dry Alkyd Enamel
01-Line Alkyd Enamel, May be substituted for 5000 Line where phenolic
anti-corrosive properties are not required

Reducing Thinner

SHF Super High Flash*
Xylene For 01-Line and 03-Line Primers, also for 5000-Line in colder temperatures
* not recommended for 01-Line

Back to top

<< Back to Transportation Coatings Home

Home | Specifications | Transportation Coatings | MSDS Sheets | Tech Data Sheets | Contact Us | Site Map