Product InformationFlat Black (FS37030) Epoxy
DHMS C4.11 Iss. A
Colour Specification: Fed. Std. 595
Colour Code: 37030
Technical Data Information
Tempo Epoxy Topcoat is a conventional aerospace polyamide epoxy for interior applications.Developed initially for aerospace applications it is also suitable for defense applications.
- Hydraulic Fluid Resistant
- Lubricating Oil Resistant
- Aircraft Fuel Resistant
- Good Flexibility
Remove all dirt, grease, oil, loose rust, scale or other surface contaminants from the substrate. On ferrous substrates SSPC 6 Commercial Blasting will enhance the performance of the coating system. If sanding is the preferred method of surface preparation 100-120 grit paper is recommended to create a surface profil for better adhesion.On aluminum substrates sandblasting or a suitable etch primer will enhance the performance properties of the primer.For aerospace use, follow proper pretreatment specification
Mix 1:1 by volume Base/Activator thoroughly. Allow 15-30 minutes induction time before using. Mix only sufficien material to use within the specifie pot life. Always add reducer to the mixed product (base + catalyst), never the opposite.
Recommended spray viscosity 18-20 seconds, #2 ZahnReduce product at room temperature to the desired spray viscosity for your application equipment.
DHMS C4.11 Iss. A MIL-C-22750D Type I
Tempo Aerospace is a AS9100D and ISO9001:2015 certified manufacturer and distributor of high performance polyurethane, epoxy, polysiloxane, lacquer and alkyd coatings.
Our specialty lies in producing made to order batches, ranging from 1 to 300 gallons (4 to 1,100L) in our 25,000 square foot controlled goods certified facility in Toronto, Canada. Custom labelling and packaging in compliance with IATA, IMDG and TDG provides expedited turnaround times for sensitive orders.
Our products are shipped worldwide.