Product: 4500-P-50-1
Product Information
ZnTech DTM Anticorrosive Epoxy Primer
Specifications
Colour Information
Colour Specification:
Colour Code:
Technical Data Information
Line
4500-P-50
Trade Name
Duroxy
Description
ZnTech DTM Anticorrosive Epoxy Primer
Abstract
ZnTech represents the latest technology in zinc based anti-corrosive primers. ZnTech delivers impressive cathodic and barrier protection that rivals the old style zinc dust primers. It is easily applied with conventional spray equipment and applicators will love the topcoat ready surface in less than 1 hour. Due to the lower zinc levels in ZnTech more of the sticky epoxy resin is available to provide superior adhesion compared to traditional zinc dust primers.
Characteristics
- Exceeds 2,500 hours salt spray on steel
- Higher current density (improved electrical conductivity)
- Great flexibility compared to conventional zinc dust primers
- Improved cohesion, combined with better substrate and intercoat adhesion
- Smoother surf
Surface Preparation
Remove all dirt, grease, oil, loose rust, scale or other surface contaminants from the substrate. On ferrous substrates SSPC SP6 Commercial Blasting is a minimum requirement. SSPC SP10 will enhance the performance of the coating system.
Mixing Instructions
Mix 4:1 by volume Base/Cure. We recommend using a squirrel cage mixer or equivalent to mix thoroughly for 5 minutes minimum. Reduce to desired viscosity. Allow 15-30 minutes induction time before using. Mix only sufficient material to use within a 6-hour period. Always add Cure component to Base component - NEVER THE REVERSE. Never mix coating or individual component from one vendor with that of another vendor.
Spray Viscosity
110 seconds #4 Ford Cup (86 KU) airless application
Line Specification
N/A
Tempo Aerospace is a AS9100D and ISO9001:2015 certified manufacturer and distributor of high performance polyurethane, epoxy, polysiloxane, lacquer and alkyd coatings.
Our specialty lies in producing made to order batches, ranging from 1 to 300 gallons (4 to 1,100L) in our 25,000 square foot controlled goods certified facility in Toronto, Canada. Custom labelling and packaging in compliance with IATA, IMDG and TDG provides expedited turnaround times for sensitive orders.
Our products are shipped worldwide.
30+
Countries
Manufacturing
Experience
Coatings
Specifications