Product InformationGloss Blue (FS15052) DuraThane
DHMS C4.04 T2 Cl.A GrA IsP Am3
Colour Specification: Fed. Std. 595
Colour Code: 15052
Post Office medium blue
Technical Data Information
7600/6600/4600 Lines are aerospace grade aliphatic polyurethane formulations with exceptional durability and physical properties. Durathane Gloss Finishes are used on both commercial and defense platforms.
- Excellent Adhesion
- Remarkable flexibility
- Outstanding solvent resistance
- Superb corrosion and UV resistance
These products are designed to be applied over properly prepared and primed substrates. Primed surfaces should be coated within 2-48 hours or a light sanding (#400 grit) and solvent wipe with MEK using a clean cotton cloth should be done. Durathane Gloss Finish can be used direct to metal however only in industrial settings where optimal performance is not required
Mix 1:1 by volume Base/Activator thoroughly. Allow 15-30 minutes induction time before using. Mix only sufficient material to use within the specified pot life. Always add reducer to the mixed product (base + activator), never the opposite.
Recommended spray viscosity 19-26 seconds, #2 Zahn Reduce product at room temperature to the desired spray viscosity for your application equipment.
D-12-003-001/SF-000 Class III MIL-C-83286 BAMS 565-002 CL.A, GR.A DHMS C4.04 Type 2 DHMS C4.04 Type 4
Tempo Aerospace is a AS9100D and ISO9001:2015 certified manufacturer and distributor of high performance polyurethane, epoxy, polysiloxane, lacquer and alkyd coatings.
Our specialty lies in producing made to order batches, ranging from 1 to 300 gallons (4 to 1,100L) in our 25,000 square foot controlled goods certified facility in Toronto, Canada. Custom labelling and packaging in compliance with IATA, IMDG and TDG provides expedited turnaround times for sensitive orders.
Our products are shipped worldwide.