Product: 4800-G-15-1

Product Information

Semi Gloss Green (FS24052) DuraThane

Specifications

DHMS C4.04 T2 Cl.A GrA IsP Am3

Colour Information

Colour Specification: Fed. Std. 595

Colour Code: 24052

Technical Data Information

Line

7800_6800_4800

Trade Name

Durathane

Description

Durathane ? Semi-Gloss Finish

Abstract

7800/6800/4800 Lines are aerospace grade aliphatic polyurethane formulations with exceptional durability and physical properties. Durathane Gloss Finishes are used on both commercial and defense platforms.

Characteristics

• Excellent Adhesion
• Remarkable flexibility
• Outstanding solvent resistance
• Superb corrosion and UV resistance

Surface Preparation

These products are designed to be applied over properly prepared and primed substrates. Primed surfaces should be coated within 2-48 hours or a light sanding (#400 grit) and solvent wipe with MEK using a clean cotton cloth should be done. Durathane Gloss Finish can be used direct to metal however only in industrial settings where optimal performance is not required

Mixing Instructions

Mix 1:1 by volume Base/Activator thoroughly. Allow 15-30 minutes induction time before using. Mix only sufficient material to use within the specified pot life. Always add reducer to the mixed product (base + activator), never the opposite.

Spray Viscosity

Recommended spray viscosity 19-26 seconds, EZ Zahn Cup #2 Reduce product at room temperature to the desired spray viscosity for your application equipment.

Line Specification

D-12-003-001/SF-000 Class III MIL-C-83286 BAMS 565-002 CL.A, GR.A DHMS C4.04 Type 2 DHMS C4.04 Type 4