Product InformationFlat Grey (FS36495) DuraThane II HS
MIL-PRF-85285 Type I Class H
Colour Specification: Fed. Std. 595
Colour Code: 36495
Technical Data Information
FLAT HIGH SOLIDS POLYURETHANE
9700 Line is a premium quality aliphatic polyurethane formulated with exceptional durability and physical properties. Developed primarily for the aerospace defence platforms, it is also suitable for commercial aerospace applications.
- Exceptional exterior durability
- Excellent flexibility
- Superior solvent and chemical resistance
- Low V.O.C.
These products are designed to be applied over properly prepared and primed substrates. Primed surfaces should be coated within 5 - 24 hours or a light sanding (#400 grit or scotch brite) and solvent wipe with MEK using a clean cotton cloth should be done.
Mix 2:1 by volume Base/Activator thoroughly. Mix only sufficient material to use within the specified pot life. Always add reducer to the mixed product (base + activator), never the opposite.
Recommended spray viscosity 25 - 30 seconds #4 Ford Cup Reduce with 9600-S-1 or thinner conforming to MIL-T-81772 TY.1 when required by contract. In areas where air quality regulations restrict volatile emissions, do not exceed 420 g/L (3.5 lb/gal) with t
MIL-PRF-85285 TYPE I Class H
Tempo Aerospace is a AS9100D and ISO9001:2015 certified manufacturer and distributor of high performance polyurethane, epoxy, polysiloxane, lacquer and alkyd coatings.
Our specialty lies in producing made to order batches, ranging from 1 to 300 gallons (4 to 1,100L) in our 25,000 square foot controlled goods certified facility in Toronto, Canada. Custom labelling and packaging in compliance with IATA, IMDG and TDG provides expedited turnaround times for sensitive orders.
Our products are shipped worldwide.