Product: 9800-B-64-1

Product Information

Semi Gloss Tan (FS23522) DuraThane II HS

Specifications

MIL-PRF-85285 Type I Class H

Colour Information

Colour Specification: Fed. Std. 595

Colour Code: 23522

23522
Yellow

Technical Data Information

Line

9800

Trade Name

DURATHANE II

Description

SEMI-GLOSS HIGH SOLIDS POLYURETHANE

Abstract

9800 Line is a premium quality aliphatic polyurethane formulated with exceptional durability and physical properties. Developed primarily for the aerospace defence platforms, it is also suitable for commercial aerospace applications.

Characteristics

  • Exceptional exterior durability
  • Excellent flexibility
  • Fast tape times
  • Superior solvent and chemical resistance
  • Low V.O.C.

Surface Preparation

These products are designed to be applied over properly prepared and primed substrates. Primed surfaces should be coated within 5 - 24 hours or a light sanding (#400 grit) and solvent wipe with MEK using a clean cotton cloth should be done.

Mixing Instructions

Mix 1:1 by volume Base/Activator thoroughly. Mix only sufficient material to use within the specified pot life. Always add reducer to the mixed product (base + activator), never the opposite.

Spray Viscosity

Recommended spray viscosity 20 - 30 seconds #4 Ford Cup Reduce with 9600-S-1 as required up to 5% by volume. Use urethane grade solvents, avoid alcohols. Avoid all sources of moisture.

Line Specification

MIL-PRF-85285 TYPE I Class H

Tempo Aerospace is a AS9100D and ISO9001:2015 certified manufacturer and distributor of high performance polyurethane, epoxy, polysiloxane, lacquer and alkyd coatings.

Our specialty lies in producing made to order batches, ranging from 1 to 300 gallons (4 to 1,100L) in our 25,000 square foot controlled goods certified facility in Toronto, Canada. Custom labelling and packaging in compliance with IATA, IMDG and TDG provides expedited turnaround times for sensitive orders.

Our products are shipped worldwide.

Ship to
30+
Countries
60+ Yrs
Manufacturing
Experience
250+
Coatings
Specifications