Technical Data Sheet: 4500-P-21
Trade Name
Duroxy
Description
Duroxy DTM Performance Primer
Abstract
Duroxy DTM is a versatile fast dry primer formulated with an innovative nanoparticle anti-corrosive pigment. That has very long term passivation activity. A passive barrier at the coating interface.
Characteristics
- Tenacious adhesion to ferrous metals
- Fast Air Dry
- Sandable after 24hrs @ 25øC 2-3mils DFT
- Good pot life
- High film build Excellent Surface Tolerance
Surface Preparation
Must be clean and free from dirt, oil, grease, rust or other contaminants. Sandblasting to SSPC SP-6 or better is recommended. Proper surface preparation will enhance the performance of the coating system
Mixing Instructions
Mix 4:1 by volume Base/Cure. We recommend using a squirrel mixer or equivalent and mix thoroughly for 5 minutes minimum. Mix only sufficient material to use within a 6-hour period. Always add Cure component to Base component - NEVER THE REVERSE. Never mix coating or individual component from one vendor with that of another vendor.
Spray Viscosity
See application.
Line Specification
N/A
Products
| Specifications | Fed. Colour | Part Number | Description |
|---|
Tempo Aerospace is a AS9100D and ISO9001:2015 certified manufacturer and distributor of high performance polyurethane, epoxy, polysiloxane, lacquer and alkyd coatings.
Our specialty lies in producing made to order batches, ranging from 1 to 300 gallons (4 to 1,100L) in our 25,000 square foot controlled goods certified facility in Toronto, Canada. Custom labelling and packaging in compliance with IATA, IMDG and TDG provides expedited turnaround times for sensitive orders.
Our products are shipped worldwide.
30+
Countries
Manufacturing
Experience
Coatings
Specifications