Technical Data Sheet: 4500-P-215Y
Trade Name
Duroxy
Description
High Solids Low V.O.C. Chromated Epoxy Primer Yellow
Abstract
Premium quality high solids epoxy primer formulated for excellent adhesion to prepared aluminum and ferrous metal substrates. This product is predominantly used on aerospace defense and commercial rotocraft platforms.
Characteristics
- Excellent impact resistance
- Excellent flexibility < 1/8? mandrel
- Low V.O.C.
- Tenacious adhesion
Surface Preparation
SAE-AMS-QQ-A-250/4 (T3 temper): MIL-C-5541, class 1A (conversion coating_ pretreatment. SAE-AMS-QQ-A-250/4 (0 temper): MIL-A-8625, type I or IC (anodized) pretreatment SAE-AMS-QQ-A-250/5 (T3 temper): Deoxidized 1 pretreatment. SAE-AMS-QQ-A-250/5 (T3 temper): MIL-C-5541, class 1A (conversion coating) pretreatment.. Apply over pretreated metal. On fiberglass-reinforced plastic, a prior coating of primer to MIL-C-8514 will facilitate stripping without damage to the fiberglass.
Mixing Instructions
Mix 3:1 by volume Base/Cure. We recommend using a squirrel mixer or equivalent and mix thoroughly for 5 minutes minimum. Allow 30 minutes induction time before using. Mix only sufficient material to use within a 4-hour period. Always add Cure component to Base component - NEVER THE REVERSE. Never mix coating or individual component from one vendor with that of another vendor.
Spray Viscosity
20-40 #4 Ford Cup
Line Specification
MIL-PRF-23377, Type I - Class C2
Products
Specifications | Fed. Colour | Part Number | Description |
---|
Tempo Aerospace is a AS9100D and ISO9001:2015 certified manufacturer and distributor of high performance polyurethane, epoxy, polysiloxane, lacquer and alkyd coatings.
Our specialty lies in producing made to order batches, ranging from 1 to 300 gallons (4 to 1,100L) in our 25,000 square foot controlled goods certified facility in Toronto, Canada. Custom labelling and packaging in compliance with IATA, IMDG and TDG provides expedited turnaround times for sensitive orders.
Our products are shipped worldwide.
30+
Countries
Manufacturing
Experience
Coatings
Specifications