Technical Data Sheet: 4500-P-21B
Duroxy DTM Fast Dry Compliant Primer
Duroxy DTM is a versatile fast dry 2.1 VOC epoxy primer formulated with excellent adhesion to most metals. Used for applications requiring excellent corrosion resistance and mechanical toughness
- Tenacious Adhesion to Ferrous & Non-Ferrous Metals
- Fast Cure
- Excellent Corrosion Resistance
- High Film Build
- Excellent Water Resistance
- Surface Tolerant
- Sandable After 24 hrs @ 23øC
Must be clean and free from dirt, oil, grease, rust or other contaminants. Sandblasting to SSPC SP-6 or better is recommended. Proper surface preparation will enhance the performance of the coating system. Aluminum may be prepared by means of an appropriate acid etch or orbital sanding with 80 grit as well.
Mix 3:1 by volume, reduce 25%-35%. We recommend using a squirrel mixer or equivalent and mix thoroughly for 5 minutes minimum. Mix only sufficient material to use within a 3-hour period (C-21XS). Always add Cure component to Base component. Never mix coating or individual component from one vendor with that of another vendor.
20-30 seconds #4 Ford Cup Conventional Spray
Tempo Aerospace is a AS9100D and ISO9001:2015 certified manufacturer and distributor of high performance polyurethane, epoxy, polysiloxane, lacquer and alkyd coatings.
Our specialty lies in producing made to order batches, ranging from 1 to 300 gallons (4 to 1,100L) in our 25,000 square foot controlled goods certified facility in Toronto, Canada. Custom labelling and packaging in compliance with IATA, IMDG and TDG provides expedited turnaround times for sensitive orders.
Our products are shipped worldwide.