Technical Data Sheet: 9200
Trade Name
GLOSS DURATHANE III
Description
HIGH SOLIDS STRUCTURAL POLYURETHANE
Abstract
Durathane III (9200-Line) is a High Solids Low VOC aliphatic polyurethane developed specifically for the commercial aerospace industry.
Characteristics
- Excellent adhesion
- Exceptional flexibility
- Fluid resistant
- Good chemical resistance
Surface Preparation
Surface pretreatment is an essential part of the painting process. Durathane III 9200-Line is intended for use over pre-treated bare or clad aluminum substrate along with an approved primer.
Mixing Instructions
Mix 1:1 by volume Base/Catalyst thoroughly. Mix only sufficient material to use within a 4-hour period. Always add reducer to the mixed product (base + activator), never the opposite.
Spray Viscosity
Recommended spray viscosity 19 - 24 seconds #4 Ford Cup Reduce with 9200-S-1 as required up to 5% by volume. Use urethane grade solvents, avoid alcohols. Avoid all sources of moisture.
Line Specification
N/A
Products
Specifications | Fed. Colour | Part Number | Description |
---|
Tempo Aerospace is a AS9100D and ISO9001:2015 certified manufacturer and distributor of high performance polyurethane, epoxy, polysiloxane, lacquer and alkyd coatings.
Our specialty lies in producing made to order batches, ranging from 1 to 300 gallons (4 to 1,100L) in our 25,000 square foot controlled goods certified facility in Toronto, Canada. Custom labelling and packaging in compliance with IATA, IMDG and TDG provides expedited turnaround times for sensitive orders.
Our products are shipped worldwide.
30+
Countries
Manufacturing
Experience
Coatings
Specifications